QuickSilver Controls

QuickSilver Controls, Inc. is a motion control product manufacturer based in San Dimas, California established in 1996. QCI markets high-performance, cost-effective motion control products, servo controllers and motors for use in the Original Equipment Manufacturer market. We continuously apply our patented technology to solve new challenges in the fields of motion control and servo motor control.

QCI.png
SilverMax™ X-Series Integrated Hybrid Servo 

The SilverMax X-Series is a fully integrated Hybrid Servo Motor with feedback, a Controller/Indexer, and a Digital Driver in a compact package. All communications and power are accessed through a single 19 pin M16 connector. The interface includes 7 I/O, all of which support both LVTTL and analog signals, and one of which also supports 0 to 10v analog. A processor back-up power input and a hardware drive enable are also included. Communication via CANopen and RS-485 serial, which may be operated simultaneously. The driver is rated to 6A continuous per phase. The system is designed for use at +12.5VDC to +48VDC.

Features include:

  • Available in NEMA 23 or 34 Frame Sizes

  • Supports RS-485 Multi-Drop, 8-Bit ASCII, 9-Bit Binary, Modbus RTU, DMX-512, and CANopen Communications

  • 7 digital inputs or outputs

  • Input power range from +12.5 to 48VDC on NEMA 32; up to 72VDC on NEMA34 

  • All Available in 4 stack lengths

Silver Nugget™ Servo Drive/Controller

The SilverNugget N2-IX is a servo controller/driver for QCI’s line of NEMA 11, 17, 23, and 24 frame, high torque, direct drive, servo motors. The N2-IX Servo Controller/Driver is designed to operate QCI’s I-Grade motors through a single motor interface cable, which carries motor power and encoder feedback. This single cable solution allows for easy installations and simple cable routing. The Silver Nugget N3-IX is used with the NEMA 34 I-Grade Motors. 

Power, communications, and I/O are accessed through a single DB15 high density interface connector. The interface includes 7 I/O, all of which support both LVTTL and analog signals, and one of which also supports 0 to 10v analog. A hardware drive enable is available as a factory option. All 7 I/O also have soft configurable pull-up/pull-down resistors, which may also be disabled, for more flexibility.

Features include:

  • N2-IX Compatible with NEMA 11,17,23, and 24 I-Grade Motors

  • N3-IX Compatible with NEMA 34 I-Grade Motors

  • Supports RS-485 Multi-Drop, 8-Bit ASCII, 9-Bit Binary, Modbus RTU, DMX-512, and CANopen Communications

  • 7 digital inputs or outputs

  • Input power range from +12.5 to 48VDC on N2-IX; up to 72VDC on N3-IX

Mosolver™ with Built-in Feedback Sensor

The Mosolver is an innovative servo motion actuator which infuses a position feedback sensor into the very structure of a high pole count AC motor. This eliminates the need for costly encoder and resolvers. By combining the motor and resolver into a single package, the Mosolver enables a compact, inexpensive and robust closed-loop motion control. Visit the Mosolver website for more information.

Benefits:

  • No Encoder Needed

  • Cost Effective

  • Energy Efficient 

  • Quiet Operation

  • Physically Robust

  • Compact and Precise

QCI-MV17C-1.png